庄卫国.最小化聚丙烯制品沉降斑的注塑工艺优化[J].精密成形工程,2010,2(3):25-26,35.
ZHUANG Wei-guo.Minimization of Sink Marks of PP Part by Injection Molding Process Optimization[J].Journal of Netshape Forming Engineering,2010,2(3):25-26,35. |
| 最小化聚丙烯制品沉降斑的注塑工艺优化 |
| Minimization of Sink Marks of PP Part by Injection Molding Process Optimization |
| 投稿时间：2010-02-05 修订日期：2010-05-10 |
| DOI： |
| 中文关键词: CAE 沉降斑 工艺参数 Taguchi正交实验 最小化 |
| 英文关键词: CAE sink mark processing parameter Taguchi orthogonal experiment minimization |
| 基金项目:南京工程学院科研基金项目(KXJ08101) |
|
| 摘要点击次数: 4252 |
| 全文下载次数: 3064 |
| 中文摘要: |
| 基于CAE，通过Taguchi实验分析注塑工艺参数对PP制品沉降斑的影响，找出其中影响较大的因素作为重点关注参数，实现了注塑工艺的优化，改善了制品表面沉降斑，从而明显提高了制品的表面质量。 |
| 英文摘要: |
| The effects of different processing parameters on sink marks, which occur on the surface of injection moulded parts, have been investigated. An L-16(45) orthogonal array design was conducted to minimize the sink marks of injection moulded polypropylene part. The factors selected in the main experiments were found to be the principal parameters affecting sink mark formation on injection moulded polypropylene part. In this way experimental investigation can help the understanding of the formation mechanism of sink marks, so that the surface quality of the part can be optimized. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号