李振红,黄英娜,张质良.亚热精密成形过程模具磨损的数值模拟研究[J].精密成形工程,2010,2(2):5-9.
LI Zhen-hong,HUANG Ying-na,ZHANG Zhi-liang.Die Wear Simulation of Semi-hot Precision Forming Process[J].Journal of Netshape Forming Engineering,2010,2(2):5-9. |
| 亚热精密成形过程模具磨损的数值模拟研究 |
| Die Wear Simulation of Semi-hot Precision Forming Process |
| 投稿时间：2010-02-05 修订日期：2010-03-10 |
| DOI： |
| 中文关键词: 亚热精密成形 模具磨损 数值模拟 |
| 英文关键词: semi-hot precision forming die wear numerical simulation |
| 基金项目: |
|
| 摘要点击次数: 3800 |
| 全文下载次数: 3217 |
| 中文摘要: |
| 采用数值模拟技术分析了亚热挤压成形阶段坯料及模具上的参量变化。基于修正的磨损模型，将其引入到有限元数值模拟软件中，对亚热挤压过程中模具磨损量的变化情况进行了分析，得到了不同变形阶段的瞬时磨损曲线及一次成形结束时的综合磨损曲线。利用研究结果对模具的磨损寿命进行了预测，与实际情况对比，两者吻合较好。 |
| 英文摘要: |
| The temperature, stress and velocity field of die and billet had been obtained by numerical simulation analysis of semi-hot extrusion. By introducing the modified wear model into the finite element numerical simulation software, die wear depth curves of different deformation stages and a forming cycle had been drawn. Using FEM simulation the life of die could be accurately predicted. All the results were in good agreement with actual conditions. So it is an important mean to help corporation get low-cost and high-quality product. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号