王荣滨,海滨.钢结硬质合金冷作模具硼-硫复合渗强化工艺[J].精密成形工程,2009,1(3):85-88.
WANG Rong-bin,HAI Bin.Reinforcement Process of Cold Working Steel Bonded Carbide Dies by Surface Boronizing and Sulfurizing[J].Journal of Netshape Forming Engineering,2009,1(3):85-88. |
| 钢结硬质合金冷作模具硼-硫复合渗强化工艺 |
| Reinforcement Process of Cold Working Steel Bonded Carbide Dies by Surface Boronizing and Sulfurizing |
| 投稿时间：2009-10-10 修订日期：2009-11-10 |
| DOI： |
| 中文关键词: 钢结硬质结合金 冷作模具 强化工艺 |
| 英文关键词: steel bonded carbide cold working dies reinforcement process |
| 基金项目: |
|
| 摘要点击次数: 3985 |
| 全文下载次数: 3315 |
| 中文摘要: |
| 为了使钢结硬质合金制成的冷作模具的使用寿命进一步提高，研究了一种硼-硫共渗强化新工艺，试验结果表明，渗硼模具的使用寿命比未渗硼模具提高了10多倍，硼-硫复合渗透模具的使用寿命又比单一渗硼模具提高了50%~70%。 |
| 英文摘要: |
| In order to increase the service life of cold working steel bonded carbide dies, a new process of surface boronizing and sulfurizing is developed. The experiments show that the service life of boronizing dies are increased more than 10 times compared with non-boronizing dies, and the service life of boronizing and sulfurizing dies are increased by 50%~70% compared with boronizing dies . |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号