李六如.薄壁主动齿轮失效分析及工艺改进[J].精密成形工程,2009,1(2):72-75.
LI Liu-ru.Failure Analysis and Improvement of Manufacture Technology of Driving Pinion[J].Journal of Netshape Forming Engineering,2009,1(2):72-75. |
| 薄壁主动齿轮失效分析及工艺改进 |
| Failure Analysis and Improvement of Manufacture Technology of Driving Pinion |
| 投稿时间：2009-06-03 修订日期：2009-09-10 |
| DOI： |
| 中文关键词: 薄壁主动齿轮 失效分析 强化喷丸 粗糙度 |
| 英文关键词: driving pinion failure analysis shot peening roughness |
| 基金项目: |
|
| 摘要点击次数: 3882 |
| 全文下载次数: 3000 |
| 中文摘要: |
| 针对薄壁主动齿轮失效原因，提出了提高薄壁主动齿轮性能的工艺改进方案，即从强力喷丸，提高齿根粗糙度，改进组装工艺以降低齿根拉应力，从而提高齿轮的疲劳强度和运行寿命。 |
| 英文摘要: |
| Through the failure analysis of driving pinion, some new manufacture technologies were put forward to improve the pinion's mechanical performance. By shot peening, improvement of roughness and assemble technology, the fatigue strength of the pinion was improved, its life is prolonged. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号