李小平,张侠.板料成形拉延筋技术研究现状[J].精密成形工程,2009,1(2):52-56.
LI Xiao-ping,ZHANG Xia.Current Status of Drawbead in Sheet Metal Forming[J].Journal of Netshape Forming Engineering,2009,1(2):52-56. |
| 板料成形拉延筋技术研究现状 |
| Current Status of Drawbead in Sheet Metal Forming |
| 投稿时间：2009-05-26 修订日期：2009-09-10 |
| DOI： |
| 中文关键词: 板料成形 拉延筋 拉延筋阻力 |
| 英文关键词: sheet metal forming drawbead drawbead restrain force |
| 基金项目: |
|
| 摘要点击次数: 3948 |
| 全文下载次数: 3616 |
| 中文摘要: |
| 拉延筋在汽车覆盖件拉深成形中起着十分重要的作用。利用拉延筋可以调节和控制板料的变形程度和变形分布，抑制破裂、起皱、面畸变等多种冲压质量问题的产生。在很多情况下，拉延筋的设置合理与否将决定覆盖件拉深的成败。较系统地总结了板料成形拉延筋技术以及拉延筋作用原理、阻力模型、影响因素等的研究现状。 |
| 英文摘要: |
| The drawbead plays a very important role in automobile covering part forming processes. Using drawbead can control the blank deformation size and deformation distribution in large range, restrain many kinds of quality problems of pressing from crack, wrinkle, distortion and so on. Under many circumstances, setting drawbead even determines pressing success or failure. This article summarizes the current status of dawbead in sheet metal forming on its principle, restrain force model, influence factors etc. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号