胡强,闫洪,揭小平.SiC /AZ61镁基复合材料蠕变性能的研究[J].精密成形工程,2009,1(2):19-22.
HU Qiang,YAN Hong,JIE Xiao-pin.Study on Creep Properties of SiC/AZ61 Composites Reinforced with SiC Particles[J].Journal of Netshape Forming Engineering,2009,1(2):19-22. |
| SiC /AZ61镁基复合材料蠕变性能的研究 |
| Study on Creep Properties of SiC/AZ61 Composites Reinforced with SiC Particles |
| 投稿时间：2009-07-30 修订日期：2009-09-10 |
| DOI： |
| 中文关键词: 搅熔铸造 镁基复合材料 蠕变性能 |
| 英文关键词: stirring-melt casting magnesium matrix composites creep properties |
| 基金项目:国家自然科学基金(50765005)；江西省教育厅资助项目 |
|
| 摘要点击次数: 4040 |
| 全文下载次数: 3087 |
| 中文摘要: |
| 采用搅熔铸造法制备碳化硅颗粒增强镁基复合材料SiC/AZ61，通过动态机械热分析、显微组织观察和XRD衍射分析了其蠕变性能。结果表明：碳化硅颗粒的加入细化了晶粒，SiC大多分布在晶界处，颗粒镁基复合材料的蠕变性能与AZ61合金相比得到了显著的改善。蠕变性能的提高主要因为高温时具有高的热稳定性的SiC颗粒取代晶界处高温下易软化的β相（Mg-17Al-12）钉扎晶界，阻止了晶界的交滑移和位错的攀移。 |
| 英文摘要: |
| SiC/AZ61 composites reinforced with SiC particles was fabricated by Stirring-Melt Casting technique. The creep properties of the composites have been studied by dynamic mechanical thermal analysis, micro-structural and XRD observation. The results show that the matrix grains with SiC particles introduced were refined obviously at high temperature and creep properties of SiC/AZ61 composites were improved comparing with AZ61 alloy. It is because that SiC particles substitute Mg-17Al-12 phase on grain boundaries which are easily intenerated at high temperature. The pinning of SiC particles prevents dislocation and slipage of grain boundary at high temperature. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号