张文生,王茂堂.感应加热对奥氏体不锈钢弯管组织和性能的影响[J].精密成形工程,2009,1(1):80-83.
ZHANG Wen-sheng,WANG Mao-tang.Effect of Induction Bending on Structure and Property of Austenitic Stainless Steel Bends[J].Journal of Netshape Forming Engineering,2009,1(1):80-83. |
| 感应加热对奥氏体不锈钢弯管组织和性能的影响 |
| Effect of Induction Bending on Structure and Property of Austenitic Stainless Steel Bends |
| 投稿时间：2009-05-13 修订日期：2009-07-10 |
| DOI： |
| 中文关键词: 奥氏体不锈钢 固溶处理 晶间腐蚀 |
| 英文关键词: Austenitic stainless steel solution annealing intergranular attack |
| 基金项目: |
|
| 摘要点击次数: 4076 |
| 全文下载次数: 3312 |
| 中文摘要: |
| 采用感应加热技术热煨奥氏体不锈钢弯管，对热煨后弯管的组织、性能及外观进行了分析研究。结果表明感应加热的奥氏体不锈钢弯管不仅可以不进行固溶和消除应力处理，而且具有各部分性能相差小、弯管表面氧化层薄，良好的外观和形状，是其它加工方法无法比拟。 |
| 英文摘要: |
| The microstructure, mechanical properties and appearance were analyzed to the Austenitic stainless steel hot bends by induction heating. It was found that Austenitic stainless steel induction bending may not need solution annealing and stress relieve treatment after induction bending process, and mechanical properties of every arc zone were similar. Induction bends surface had a few mill scale, appearance and shape of hot bends were very good, these advantages make induction bending process prevail over other manufacturing processes. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号