贾佳佳,张治民,张宝红,等.镁合金扇形件挤压成形数值模拟[J].精密成形工程,2009,1(1):77-79.
JIA Jia-jia,ZHANG Zhi-min,ZHANG Bao-hong,et al.The Numerical Simulation of Magnesium Alloy Fan-shaped Part[J].Journal of Netshape Forming Engineering,2009,1(1):77-79. |
| 镁合金扇形件挤压成形数值模拟 |
| The Numerical Simulation of Magnesium Alloy Fan-shaped Part |
| 投稿时间：2009-05-19 修订日期：2009-07-10 |
| DOI： |
| 中文关键词: 镁合金 挤压成形 数值模拟 |
| 英文关键词: magnesium alloy extrusion forming numerical simulation |
| 基金项目: |
|
| 摘要点击次数: 3750 |
| 全文下载次数: 3034 |
| 中文摘要: |
| 以刚塑性有限元分析为基础，对镁合金扇形零件的挤压成形工艺进行了模拟分析，制定出扇形零件的成形工艺，即镦挤-反挤压复合成形工艺。镦挤制坯工艺优化坯料结构，反挤压工艺成形零件。根据数值模拟的工艺参数进行试验研究，成形出符合要求的零件。 |
| 英文摘要: |
| Upon rigid-plastic FE analysis the numerical simulation on extrusion technology of magnesium alloy fan-shaped part has been done to formulate the fan-shaped part forming process which is upsetting extrusion-anti-extrusion compound forming process. The upsetting extrusion process optimized the blank structure, and the anti-extrusion process formed the part. The experiment was done by the parameters of numerical simulation, and qualified parts were obtained. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号