张海燕,张士宏,程明,等.TC11钛合金压气机盘闭模锻造过程中的缺陷预测[J].精密成形工程,2009,1(1):62-65.
ZHANG Hai-yan,ZHANG Shi-hong,CHENG Ming,et al.Prediction of Defects During Closed Die Forging of TC11 Alloy Compressor Disks[J].Journal of Netshape Forming Engineering,2009,1(1):62-65. |
| TC11钛合金压气机盘闭模锻造过程中的缺陷预测 |
| Prediction of Defects During Closed Die Forging of TC11 Alloy Compressor Disks |
| 投稿时间：2009-04-20 修订日期：2009-07-10 |
| DOI： |
| 中文关键词: 钛合金 压气机盘 损伤模型 缺陷 数值分析 |
| 英文关键词: titanium alloy compressor disk damage model defect numerical analysis |
| 基金项目: |
|
| 摘要点击次数: 3818 |
| 全文下载次数: 3261 |
| 中文摘要: |
| TC11钛合金压气机盘在实际生产中存在各种缺陷，降低了压气机盘的使用性能。将基于试验数据建立的TC11钛合金高温塑性变形时的延性损伤演化模型以及本构模型与有限元相结合，对某TC11钛合金压气机盘等温闭模锻造过程中的温度、等效应变和损伤变量的分布进行了数值分析，同时预测了塑性失稳区的位置。为优化其成形工艺提供了一种有效的方法。 |
| 英文摘要: |
| There are some defects in the actual forging of TC11 alloy compressor disks, which decreases the performance of the compressor disks. In this paper, a ductile damage evolution model and a constitutive model for TC11 alloy during high temperature deformation developed based on the data from experiments were coupled with a FE simulator. Furthermore, the distributions of temperature, equivalent strain and damage value of TC11 alloy compressor disk during closed die forging were simulated and analyzed, and the plastic instability areas were predicted. It has provided an effective method to optimize the forging process of TC11 alloy compressor disks. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号